Incredibond Solvent-Free Grab Adhesive 310ml – High Strength Instant Grab (White)

In stock
SKU: BDIBWH
Regular price £1.99
Price Excluding VAT
Order by 16:00 Mon–Fri for same-day dispatch 🚚
Fast UK delivery 📦

Bond It Incredibond – High Strength Solvent-Free Grab Adhesive (White, 310ml)

Bond It Incredibond is a fibre-reinforced, high strength, solvent-free grab adhesive with instant grab (initial grab in excess of 2000 N/m²). Designed for trade use, it delivers strong hold with a low-odour, no-VOC formulation and can often be used as an alternative to screws and nails in suitable applications.

Key Features

  • Instant grab: initial grab in excess of 2000 N/m²
  • High dry bond strength: developed to match solvent-based grab adhesives
  • Fibre reinforced: strong, reliable hold
  • Solvent-free: low odour and no VOC emissions
  • Wide adhesion range: bonds to many common construction materials
  • Interior + exterior use: suitable for sheltered external positions (not for immersion)

Typical Trade Uses

  • Skirting boards, dado rails, coving and architraves
  • Polystyrene mouldings and general trim fixing
  • General site fixing where at least one surface is porous

Suitable Substrates

  • Wood, OSB, chipboard
  • Concrete, plaster, mortar, ceramic
  • Galvanised metal/steel, uPVC and most plastics

Note: At least one surface must be porous, otherwise drying times may be significantly longer.

Coverage & Working Time

  • Coverage: approx. 10 linear metres per cartridge with a 6mm bead
  • Open time: approx. 15 minutes
  • Load bearing: allow 24–48 hours; heavier items may need temporary support for 48 hours

Application Tips

  • Ensure surfaces are clean, dry and free from dust/grease.
  • Apply a continuous bead and press parts together firmly (or tamp lightly with a rubber mallet).
  • For panels/large objects, apply 6mm beads at 20cm centres.
  • Clean tools immediately with soapy water.

Limitations

  • Not for very wet areas or continuous water immersion.
  • Do not use on polythene, polypropylene, asphalt or bitumen.
  • Certain substrates may require priming—test a small area first.

Specifications

  • Colour: White
  • Size: 310ml plastic cartridge
  • Application temperature: +5°C to +30°C
  • Service temperature: -20°C to +50°C
  • Shelf life: minimum 12 months (unopened, stored correctly)